esphome:
  name: detect-r-office
  friendly_name: detecteur radar office
  platformio_options:
     board_build.extra_flags:
        - "-DARDUINO_USB_CDC_ON_BOOT=0" # Override, de

esp32:
  board: lolin_s2_mini
  framework:
    type: arduino

# Enable logging
logger:

ld2410:

# Enable Home Assistant API
api:
  encryption:
    key: "otdJD8ielKqLCvj4qbyhkldgv+jt6/M722HD2FCFDYk="

ota:
  password: "e3b8366aa77dd311736576507f47ed69"

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Detect-R-Office Fallback Hotspot"
    password: "d7jRAr6v15MP"

captive_portal:

web_server:
  port: 80

uart:
  tx_pin: GPIO18
  rx_pin: GPIO33
  baud_rate: 256000
  parity: NONE
  stop_bits: 1

sensor:
  - platform: ld2410
    moving_distance: #Distance cible en mouvement
      name : Distance cible en mouvement
    still_distance: #Distance cible immobile
      name: Distance cible immobile
    moving_energy: #Quantité de mouvement
      name: Quantite de mouvement
    still_energy: #Quantité d'immobilité
      name: Quantite immobile
    detection_distance: #Détection de la distance
      name: Distance de detection 

binary_sensor:
  - platform: ld2410
    has_target: #Présence
      name: Presence
    has_moving_target: #Cible mobile
      name: Cible mobile
    has_still_target: #Cible immobile
      name: Cible immobile

number:
  - platform: ld2410
    timeout: #Temps pour passer le binary sensor Présence à faux
      name: timeout
    max_move_distance_gate: #Distance maximum de détection du mouvemenet 2-8
      name: Distance maximum de detection du mouvemenet
    max_still_distance_gate: #Distance maximum de détection d'immobilité 2-8
      name: Distance maximum de detection d immobilite
    g0:
      move_threshold: #Déplacer de seuil
        name: g0 deplacer de seuil
      still_threshold: #Seuil de déclenchement
        name: g0 seuil de declenchement