# If you are running more than one instances of Graylog server you have to select one of these
# instances as master. The master will perform some periodical tasks that non-masters won't perform.
is_master = true

# The auto-generated node ID will be stored in this file and read after restarts. It is a good idea
# to use an absolute file path here if you are starting Graylog server from init scripts or similar.
node_id_file = /usr/share/graylog/data/config/node-id

root_username = admin
root_timezone = UTC
bin_dir = /usr/share/graylog/bin
data_dir = /usr/share/graylog/data
plugin_dir = /usr/share/graylog/plugin


# List of Elasticsearch hosts Graylog should connect to.
# Need to be specified as a comma-separated list of valid URIs for the http ports of your elasticsearch nodes.
# If one or more of your elasticsearch hosts require authentication, include the credentials in each node URI that
# requires authentication.

# Maximum number of retries to connect to elasticsearch on boot for the version probe.
#
# Default: 0, retry indefinitely with the given delay until a connection could be established
elasticsearch_version_probe_attempts = 5

# Waiting time in between connection attempts for elasticsearch_version_probe_attempts
#
# Default: 5s
elasticsearch_version_probe_delay = 5s

# Maximum amount of time to wait for successful connection to Elasticsearch HTTP port.
#
# Default: 10 Seconds
elasticsearch_connect_timeout = 10s

# Maximum amount of time to wait for reading back a response from an Elasticsearch server.
# (e. g. during search, index creation, or index time-range calculations)
#
# Default: 60 seconds
elasticsearch_socket_timeout = 60s

# Maximum idle time for an Elasticsearch connection. If this is exceeded, this connection will
# be tore down.
#
# Default: inf
#elasticsearch_idle_timeout = -1s

# Maximum number of total connections to Elasticsearch.
#
# Default: 200
#elasticsearch_max_total_connections = 200

# Maximum number of total connections per Elasticsearch route (normally this means per
# elasticsearch server).
#
# Default: 20
#elasticsearch_max_total_connections_per_route = 20

# Maximum number of times Graylog will retry failed requests to Elasticsearch.
#
# Default: 2
#elasticsearch_max_retries = 2

# Enable automatic Elasticsearch node discovery through Nodes Info,
# see https://www.elastic.co/guide/en/elasticsearch/reference/5.4/cluster-nodes-info.html
#
# WARNING: Automatic node discovery does not work if Elasticsearch requires authentication, e. g. with Shield.
#
# Default: false
#elasticsearch_discovery_enabled = true

# Filter for including/excluding Elasticsearch nodes in discovery according to their custom attributes,
# see https://www.elastic.co/guide/en/elasticsearch/reference/5.4/cluster.html#cluster-nodes
#
# Default: empty
#elasticsearch_discovery_filter = rack:42

# Frequency of the Elasticsearch node discovery.
#
# Default: 30s
# elasticsearch_discovery_frequency = 30s

# Set the default scheme when connecting to Elasticsearch discovered nodes
#
# Default: http (available options: http, https)
#elasticsearch_discovery_default_scheme = http

# Enable payload compression for Elasticsearch requests.
#
# Default: false
#elasticsearch_compression_enabled = true

# Enable use of "Expect: 100-continue" Header for Elasticsearch index requests.
# If this is disabled, Graylog cannot properly handle HTTP 413 Request Entity Too Large errors.
#
# Default: true
#elasticsearch_use_expect_continue = true

# Graylog will use multiple indices to store documents in. You can configured the strategy it uses to determine
# when to rotate the currently active write index.
# It supports multiple rotation strategies:
#   - "count" of messages per index, use elasticsearch_max_docs_per_index below to configure
#   - "size" per index, use elasticsearch_max_size_per_index below to configure
# valid values are "count", "size" and "time", default is "count"
#
# ATTENTION: These settings have been moved to the database in 2.0. When you upgrade, make sure to set these
#            to your previous 1.x settings so they will be migrated to the database!
#            This configuration setting is only used on the first start of Graylog. After that,
#            index related settings can be changed in the Graylog web interface on the 'System / Indices' page.
#            Also see https://docs.graylog.org/docs/index-model#index-set-configuration
rotation_strategy = count

# (Approximate) maximum number of documents in an Elasticsearch index before a new index
# is being created, also see no_retention and elasticsearch_max_number_of_indices.
# Configure this if you used 'rotation_strategy = count' above.
#
# ATTENTION: These settings have been moved to the database in 2.0. When you upgrade, make sure to set these
#            to your previous 1.x settings so they will be migrated to the database!
#            This configuration setting is only used on the first start of Graylog. After that,
#            index related settings can be changed in the Graylog web interface on the 'System / Indices' page.
#            Also see https://docs.graylog.org/docs/index-model#index-set-configuration
elasticsearch_max_docs_per_index = 20000000

# (Approximate) maximum size in bytes per Elasticsearch index on disk before a new index is being created, also see
# no_retention and elasticsearch_max_number_of_indices. Default is 1GB.
# Configure this if you used 'rotation_strategy = size' above.
#
# ATTENTION: These settings have been moved to the database in 2.0. When you upgrade, make sure to set these
#            to your previous 1.x settings so they will be migrated to the database!
#            This configuration setting is only used on the first start of Graylog. After that,
#            index related settings can be changed in the Graylog web interface on the 'System / Indices' page.
#            Also see https://docs.graylog.org/docs/index-model#index-set-configuration
#elasticsearch_max_size_per_index = 1073741824

# (Approximate) maximum time before a new Elasticsearch index is being created, also see
# no_retention and elasticsearch_max_number_of_indices. Default is 1 day.
# Configure this if you used 'rotation_strategy = time' above.
# Please note that this rotation period does not look at the time specified in the received messages, but is
# using the real clock value to decide when to rotate the index!
# Specify the time using a duration and a suffix indicating which unit you want:
#  1w  = 1 week
#  1d  = 1 day
#  12h = 12 hours
# Permitted suffixes are: d for day, h for hour, m for minute, s for second.
#
# ATTENTION: These settings have been moved to the database in 2.0. When you upgrade, make sure to set these
#            to your previous 1.x settings so they will be migrated to the database!
#            This configuration setting is only used on the first start of Graylog. After that,
#            index related settings can be changed in the Graylog web interface on the 'System / Indices' page.
#            Also see https://docs.graylog.org/docs/index-model#index-set-configuration
#elasticsearch_max_time_per_index = 1d

# Disable checking the version of Elasticsearch for being compatible with this Graylog release.
# WARNING: Using Graylog with unsupported and untested versions of Elasticsearch may lead to data loss!
#elasticsearch_disable_version_check = true

# Disable message retention on this node, i. e. disable Elasticsearch index rotation.
#no_retention = false

# How many indices do you want to keep?
#
# ATTENTION: These settings have been moved to the database in 2.0. When you upgrade, make sure to set these
#            to your previous 1.x settings so they will be migrated to the database!
#            This configuration setting is only used on the first start of Graylog. After that,
#            index related settings can be changed in the Graylog web interface on the 'System / Indices' page.
#            Also see https://docs.graylog.org/docs/index-model#index-set-configuration
elasticsearch_max_number_of_indices = 20

# Decide what happens with the oldest indices when the maximum number of indices is reached.
# The following strategies are availble:
#   - delete # Deletes the index completely (Default)
#   - close # Closes the index and hides it from the system. Can be re-opened later.
#
# ATTENTION: These settings have been moved to the database in 2.0. When you upgrade, make sure to set these
#            to your previous 1.x settings so they will be migrated to the database!
#            This configuration setting is only used on the first start of Graylog. After that,
#            index related settings can be changed in the Graylog web interface on the 'System / Indices' page.
#            Also see https://docs.graylog.org/docs/index-model#index-set-configuration
retention_strategy = delete

# How many Elasticsearch shards and replicas should be used per index? Note that this only applies to newly created indices.
# ATTENTION: These settings have been moved to the database in Graylog 2.2.0. When you upgrade, make sure to set these
#            to your previous settings so they will be migrated to the database!
#            This configuration setting is only used on the first start of Graylog. After that,
#            index related settings can be changed in the Graylog web interface on the 'System / Indices' page.
#            Also see https://docs.graylog.org/docs/index-model#index-set-configuration
elasticsearch_shards = 4
elasticsearch_replicas = 0

# Prefix for all Elasticsearch indices and index aliases managed by Graylog.
#
# ATTENTION: These settings have been moved to the database in Graylog 2.2.0. When you upgrade, make sure to set these
#            to your previous settings so they will be migrated to the database!
#            This configuration setting is only used on the first start of Graylog. After that,
#            index related settings can be changed in the Graylog web interface on the 'System / Indices' page.
#            Also see https://docs.graylog.org/docs/index-model#index-set-configuration
elasticsearch_index_prefix = graylog

# Name of the Elasticsearch index template used by Graylog to apply the mandatory index mapping.
# Default: graylog-internal
#
# ATTENTION: These settings have been moved to the database in Graylog 2.2.0. When you upgrade, make sure to set these
#            to your previous settings so they will be migrated to the database!
#            This configuration setting is only used on the first start of Graylog. After that,
#            index related settings can be changed in the Graylog web interface on the 'System / Indices' page.
#            Also see https://docs.graylog.org/docs/index-model#index-set-configuration
#elasticsearch_template_name = graylog-internal

# Do you want to allow searches with leading wildcards? This can be extremely resource hungry and should only
# be enabled with care. See also: https://docs.graylog.org/docs/query-language
allow_leading_wildcard_searches = false

# Do you want to allow searches to be highlighted? Depending on the size of your messages this can be memory hungry and
# should only be enabled after making sure your Elasticsearch cluster has enough memory.
allow_highlighting = false

# Analyzer (tokenizer) to use for message and full_message field. The "standard" filter usually is a good idea.
# All supported analyzers are: standard, simple, whitespace, stop, keyword, pattern, language, snowball, custom
# Elasticsearch documentation: https://www.elastic.co/guide/en/elasticsearch/reference/2.3/analysis.html
# Note that this setting only takes effect on newly created indices.
#
# ATTENTION: These settings have been moved to the database in Graylog 2.2.0. When you upgrade, make sure to set these
#            to your previous settings so they will be migrated to the database!
#            This configuration setting is only used on the first start of Graylog. After that,
#            index related settings can be changed in the Graylog web interface on the 'System / Indices' page.
#            Also see https://docs.graylog.org/docs/index-model#index-set-configuration
elasticsearch_analyzer = standard

# Global timeout for index optimization (force merge) requests.
# Default: 1h
#elasticsearch_index_optimization_timeout = 1h

# Maximum number of concurrently running index optimization (force merge) jobs.
# If you are using lots of different index sets, you might want to increase that number.
# Default: 20
#elasticsearch_index_optimization_jobs = 20

# Mute the logging-output of ES deprecation warnings during REST calls in the ES RestClient
#elasticsearch_mute_deprecation_warnings = true

# Time interval for index range information cleanups. This setting defines how often stale index range information
# is being purged from the database.
# Default: 1h
#index_ranges_cleanup_interval = 1h

# Time interval for the job that runs index field type maintenance tasks like cleaning up stale entries. This doesn't
# need to run very often.
# Default: 1h
#index_field_type_periodical_interval = 1h

# Batch size for the Elasticsearch output. This is the maximum (!) number of messages the Elasticsearch output
# module will get at once and write to Elasticsearch in a batch call. If the configured batch size has not been
# reached within output_flush_interval seconds, everything that is available will be flushed at once. Remember
# that every outputbuffer processor manages its own batch and performs its own batch write calls.
# ("outputbuffer_processors" variable)
output_batch_size = 500

# Flush interval (in seconds) for the Elasticsearch output. This is the maximum amount of time between two
# batches of messages written to Elasticsearch. It is only effective at all if your minimum number of messages
# for this time period is less than output_batch_size * outputbuffer_processors.
output_flush_interval = 1

# As stream outputs are loaded only on demand, an output which is failing to initialize will be tried over and
# over again. To prevent this, the following configuration options define after how many faults an output will
# not be tried again for an also configurable amount of seconds.
output_fault_count_threshold = 5
output_fault_penalty_seconds = 30

# The number of parallel running processors.
# Raise this number if your buffers are filling up.
processbuffer_processors = 5
outputbuffer_processors = 3

# The following settings (outputbuffer_processor_*) configure the thread pools backing each output buffer processor.
# See https://docs.oracle.com/javase/8/docs/api/java/util/concurrent/ThreadPoolExecutor.html for technical details

# When the number of threads is greater than the core (see outputbuffer_processor_threads_core_pool_size),
# this is the maximum time in milliseconds that excess idle threads will wait for new tasks before terminating.
# Default: 5000
#outputbuffer_processor_keep_alive_time = 5000

# The number of threads to keep in the pool, even if they are idle, unless allowCoreThreadTimeOut is set
# Default: 3
#outputbuffer_processor_threads_core_pool_size = 3

# The maximum number of threads to allow in the pool
# Default: 30
#outputbuffer_processor_threads_max_pool_size = 30

# UDP receive buffer size for all message inputs (e. g. SyslogUDPInput).
#udp_recvbuffer_sizes = 1048576

# Wait strategy describing how buffer processors wait on a cursor sequence. (default: sleeping)
# Possible types:
#  - yielding
#     Compromise between performance and CPU usage.
#  - sleeping
#     Compromise between performance and CPU usage. Latency spikes can occur after quiet periods.
#  - blocking
#     High throughput, low latency, higher CPU usage.
#  - busy_spinning
#     Avoids syscalls which could introduce latency jitter. Best when threads can be bound to specific CPU cores.
processor_wait_strategy = blocking

# Size of internal ring buffers. Raise this if raising outputbuffer_processors does not help anymore.
# For optimum performance your LogMessage objects in the ring buffer should fit in your CPU L3 cache.
# Must be a power of 2. (512, 1024, 2048, ...)
ring_size = 65536

inputbuffer_ring_size = 65536
inputbuffer_processors = 2
inputbuffer_wait_strategy = blocking

# Enable the message journal.
message_journal_enabled = true

# The directory which will be used to store the message journal. The directory must be exclusively used by Graylog and
# must not contain any other files than the ones created by Graylog itself.
#
# ATTENTION:
#   If you create a seperate partition for the journal files and use a file system creating directories like 'lost+found'
#   in the root directory, you need to create a sub directory for your journal.
#   Otherwise Graylog will log an error message that the journal is corrupt and Graylog will not start.
message_journal_dir = data/journal

# Journal hold messages before they could be written to Elasticsearch.
# For a maximum of 12 hours or 5 GB whichever happens first.
# During normal operation the journal will be smaller.
#message_journal_max_age = 12h
#message_journal_max_size = 5gb

#message_journal_flush_age = 1m
#message_journal_flush_interval = 1000000
#message_journal_segment_age = 1h
#message_journal_segment_size = 100mb

# Number of threads used exclusively for dispatching internal events. Default is 2.
#async_eventbus_processors = 2

# How many seconds to wait between marking node as DEAD for possible load balancers and starting the actual
# shutdown process. Set to 0 if you have no status checking load balancers in front.
lb_recognition_period_seconds = 3

# MongoDB connection string
# See https://docs.mongodb.com/manual/reference/connection-string/ for details
#mongodb_uri = mongodb://localhost/graylog
mongodb_uri = mongodb://mongodb/graylog

# Authenticate against the MongoDB server
# '+'-signs in the username or password need to be replaced by '%2B'
#mongodb_uri = mongodb://grayloguser:secret@localhost:27017/graylog

# Use a replica set instead of a single host
#mongodb_uri = mongodb://grayloguser:secret@localhost:27017,localhost:27018,localhost:27019/graylog?replicaSet=rs01

# DNS Seedlist https://docs.mongodb.com/manual/reference/connection-string/#dns-seedlist-connection-format
#mongodb_uri = mongodb+srv://server.example.org/graylog

# Increase this value according to the maximum connections your MongoDB server can handle from a single client
# if you encounter MongoDB connection problems.
mongodb_max_connections = 1000

# Number of threads allowed to be blocked by MongoDB connections multiplier. Default: 5
# If mongodb_max_connections is 100, and mongodb_threads_allowed_to_block_multiplier is 5,
# then 500 threads can block. More than that and an exception will be thrown.
# http://api.mongodb.com/java/current/com/mongodb/MongoOptions.html#threadsAllowedToBlockForConnectionMultiplier
mongodb_threads_allowed_to_block_multiplier = 5

# For some cluster-related REST requests, the node must query all other nodes in the cluster. This is the maximum number
# of threads available for this. Increase it, if '/cluster/*' requests take long to complete.
# Should be http_thread_pool_size * average_cluster_size if you have a high number of concurrent users.
proxied_requests_thread_pool_size = 32

# The allowed TLS protocols for system wide TLS enabled servers. (e.g. message inputs, http interface)
# Setting this to an empty value, leaves it up to system libraries and the used JDK to chose a default.
# Default: TLSv1.2,TLSv1.3  (might be automatically adjusted to protocols supported by the JDK)
enabled_tls_protocols= TLSv1.2,TLSv1.3

# Enable Prometheus exporter HTTP server.
# Default: false
prometheus_exporter_enabled = true

# IP address and port for the Prometheus exporter HTTP server.
# Default: 127.0.0.1:9833
prometheus_exporter_bind_address = 127.0.0.1:9833

#Email Settings
transport_email_enabled = true
transport_email_hostname = outbound.mailhop.org
transport_email_port = 587
transport_email_use_auth = true
transport_email_use_tls = true
transport_email_use_ssl = false
transport_email_auth_username = xxxxx
transport_email_auth_password = xxxxxx
transport_email_subject_prefix = [graylog]
transport_email_from_email = graylog@example.com
transport_email_web_interface_url = https://graylog.example.com